Client-Name - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

client-name

Syntax
Release Information
Description
Options
Mode
428
client-name clientname
no client-name
Command introduced before JunosE Release 7.1.0.
From Domain Map Tunnel Configuration or Tunnel Group Tunnel Configuration mode,
sets a hostname for a tunnel that the LAC uses when communicating with the LNS about
the tunnel. The no version removes the hostname from the tunnel.
NOTE: In Domain Map Tunnel Configuration mode, this command is replacing
the hostname command. The hostname command may be removed
completely from Domain Map Tunnel Configuration mode in a future release.
clientname—String of up to 64 characters (no spaces)
Domain Map Tunnel Configuration, Tunnel Group Tunnel Configuration
Copyright © 2010, Juniper Networks, Inc.