Clns Host - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clns host

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clns host name nsap
no clns host name
Command introduced before JunosE Release 7.1.0.
Defines a name-to-NSAP mapping that can then be used with commands requiring
NSAPs. Enables dynamic resolution of hostnames to system IDs (within the NSAP
address). The hostname mapping is sent in the LSPs within the dynamic hostname TLV
tuple. Display the TLV by issuing the show isis database detail command. Use the show
hosts command to display the mapping. The no version restores the default of no mapping
defined.
name—Name for the NSAP; first character can be either a letter or a number. If a number
is used, the operations you can perform are limited.
nsap—NSAP to which that name maps
Global Configuration
Chapter 4: C Commands
431