Clear Suspicious-Control-Flow-Detection - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear suspicious-control-flow-detection

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear suspicious-control-flow-detection
[ interface interfaceSpecifier protocol protocolValue address ethernetAddress slot
slotNumber ]
Command introduced in JunosE Release 7.3.0.
Clears one or more suspicious flows. If you do not specify a slot, interface, or IP address,
clears all suspicious flows. If you specify a slot, clears all specified suspicious flows on
that slot. If you specify an interface and protocol, clears flows that are identified down
to the Ethernet mac address level. There is no no version.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
protocolValue—Name of the protocol to be cleared
ethernetAddress—Ethernet address to be cleared
slotNumber—Number of the slot to be cleared
Privileged Exec, User Exec
Chapter 4: C Commands
427