Ip Rip Authentication Key - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

ip rip authentication key

ip rip authentication key [ 0 | 8 ] authkey
Syntax
no ip rip authentication key
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the password for text authentication and the key for MD5 authentication.
Description
The no version clears the key for the interface. Supported only in RIP version 2.
Authentication is disabled by default.
Options
Interface Configuration, Subinterface Configuration
Mode
0 Indicates the authKey is entered in unencrypted form (plaintext); this is the
default option
8 Indicates the authKey is entered in encrypted form (ciphertext)
authkey Password sent with RIP messages or the key used to encrypt/decrypt
RIP messages, depending on the authentication mode set for this interface
Chapter 10: I Commands
ip rip authentication key
905