Clear Mpls Dynamic-Interfaces On-Major-Interfaces - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear mpls dynamic-interfaces on-major-interfaces

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear mpls dynamic-interfaces [ ip | ipv6 ] on-major-interfaces
[ interfaceType interfaceSpecifier ]
Command introduced in JunosE Release 7.2.0.
Removes and re-creates both dynamic IPv4 interfaces and dynamic IPv6 interfaces that
are on top of all MPLS major interfaces or on top of the specified MPLS major interface.
There is no no version.
ip—Specifies that only IPv4 dynamic interfaces are removed and re-created
ipv6—Specifies that only IPv6 dynamic interfaces are removed and re-created
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Chapter 4: C Commands
423