Clear Mpls Ldp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

clear mpls ldp

Syntax
Release Information
Description
Options
Mode
424
clear mpls ldp [ prefix destAddr [ maskLen | mask ] | neighbor [ neighborAddress ] ]
Command introduced before JunosE Release 7.1.0.
Removes and reestablishes existing LDP LSPs, thereby forcing the reapplication of policies
on the reestablished topology-driven LDP LSPs. You can clear all LDP LSPs or limit the
clearance to only LSPs to a specified prefix or neighbor. Affects the data traffic on LSPs
that are in use when the command is issued. There is no no version.
destAddr—IP address of the prefix to be cleared
maskLen—Length of the prefix to be cleared; number in the range 0–32
mask—Mask for the prefix to be cleared
neighborAddress—IP address of a neighbor 32-bit dotted-decimal format of the entry
to be cleared
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.