Clear Ipv6 Tunnel-Routes - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear ipv6 tunnel-routes

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear ipv6 tunnel-routes [ ipv6Prefix | * ]
Command introduced in JunosE Release 7.1.0.
Clears and then refreshes IPv6 routes from the tunnel routing table. To clear the routes
for a specific IPv6 network, specify the IPv6 prefix. To clear all dynamic IPv6 routes, use
the * (asterisk) option. There is no no version.
ipv6Prefix—IPv6 network for which to clear route information
*—Clears all dynamic IPv6 routes
Privileged Exec
Chapter 4: C Commands
415