Clear Ip Rip Dynamic-Interfaces - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

clear ip rip dynamic-interfaces

Syntax
Release Information
Description
Mode
398
clear ip rip dynamic-interfaces
Command introduced before JunosE Release 7.1.0.
Clears all existing dynamic, unnumbered interfaces that were created since issuing the
ip rip copy-to-dynamic command. There is no no version.
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.