Clear Ipv6 Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear ipv6 interface

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear ipv6 interface interfaceType interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Clears the counters on the specified IPv6 interface. The default is all interface types and
all interfaces. There is no no version.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Chapter 4: C Commands
405