Clear Ipv6 Prefix-List - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear ipv6 prefix-list

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear ipv6 prefix-list [ listName [ network/length] ]
Command introduced before JunosE Release 7.1.0.
Clears all hit counts in all IPv6 prefix lists, the specified prefix list, or the specified entry
from the specified prefix list. There is no no version.
listName—Name of the IPv6 prefix list; string of up to 32 characters
network—Base address of the network route to be filtered; for example, ::ffff:a:b:c:d
length—Length of the network prefix; number of bits masking base address to produce
address to be matched
Privileged Exec, User Exec
Chapter 4: C Commands
413