Clear Ip Pim Remote-Neighbor Count - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear ip pim remote-neighbor count

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear ip pim remote-neighbor [ ipAddress ] count
Command introduced before JunosE Release 7.1.0.
Clears the counters for remote neighbor statistics on all interfaces or the specified
interface. There is no no version.
NOTE: This command is typically used when you configure PIM remote
neighbors to run multicast services over BGP/MPLS VPNs. That functionality
is no longer supported.
ipAddress—IP address of the interface
Privileged Exec, User Exec
Chapter 4: C Commands
395