Baseline Frame-Relay Multilinkinterface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline frame-relay multilinkinterface

Syntax
Release Information
Description
Options
Mode
224
baseline frame-relay multilinkinterface interfaceType interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for MLFR links. The router implements the baseline by reading
and storing the statistics at the time the baseline is set and then subtracting this baseline
whenever baseline-relative statistics are retrieved. There is no no version.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5
serial
pos
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.