JunosE 11.3.x Broadband Access Configuration Guide
Setting Baselines for DHCP Statistics
Setting a Baseline for DHCP Relay and Relay Proxy
Setting a Baseline for DHCP Proxy Server Statistics
Setting a Baseline for DHCP External Server Statistics
534
Monitoring DHCPv6 Local Server DNS Servers on page 568
Monitoring DHCPv6 Local Server Prefix Lifetime on page 568
Monitoring DHCPv6 Local Server Statistics on page 569
Monitoring Duplicate MAC Addresses Use By DHCP Local Server Clients on page 570
Monitoring the Maximum Number of Available Leases on page 571
Monitoring Static IP Address and MAC Address Pairs Supplied by DHCP Local
Server on page 572
Monitoring Status of DHCP Applications on page 573
You can use the baseline dhcp commands to set statistics baselines for DHCP operations.
The router implements the baseline by reading and storing the statistics at the time the
baseline is set and then subtracting this baseline when you retrieve baseline-relative
statistics.
Use the delta keyword with the show dhcp commands to display baselined statistics.
Tasks to set a baseline for DHCP statistics are:
Setting a Baseline for DHCP Relay and Relay Proxy on page 534
1.
Setting a Baseline for DHCP Proxy Server Statistics on page 534
2.
Setting a Baseline for DHCP External Server Statistics on page 534
3.
Setting a Baseline for DHCP Local Server Statistics on page 535
4.
To set a statistics baseline for DHCP relay and DHCP relay proxy: :
Issue the baseline dhcp relay command:
host1#baseline dhcp relay
There is no no version.
To set a baseline for DHCP proxy server statistics.
Issue the baseline dhcp server command:
host1#baseline dhcp server
There is no no version.
To set a baseline for DHCP external server statistics.
Issue the baseline ip dhcp-external command:
host1#baseline ip dhcp-external
Copyright © 2010, Juniper Networks, Inc.