Ip Netstream Max-Entry - H3C SR6600 Command Reference Manual

[Sysname-GigabitEthernet2/0/0] ip netstream filter acl 2003 outbound

ip netstream max-entry

Use ip netstream max-entry to configure the maximum number of NetStream entries that the cache can
accommodate, and configure whether to age out the entries or disable creation of a new entry when the
number of entries in the cache reaches the upper limit.
Use undo ip netstream max-entry to restore the default.
Syntax
ip netstream max-entry { max-entries | aging | disable-caching }
undo ip netstream max-entry
Default
The cache can accommodate a maximum of 620000 NetStream entries, and the device ages out the
entries when the upper limit is reached.
Views
System view
Default command level
3: Manage level
Parameters
max-entries: Specifies maximum number of entries that the cache can save. The value range is 1000 to
620000.
aging: Ages out the entries in the cache when the maximum number is reached.
disable-caching: Disables creation of a new entry when the maximum number is reached.
Usage guidelines
The following matrix shows the command and router compatibility:
Command
ip netstream
max-entry
Examples
# Set the maximum entries in the cache to 5000.
<Sysname> system-view
[Sysname] ip netstream max-entry 5000
# Disable creation of a new entry when the upper limit is reached.
<Sysname> system-view
[Sysname] ip netstream max-entry disable-caching
# Configure the device to age out the entries when the upper limit is reached.
<Sysname> system-view
[Sysname] ip netstream max-entry aging
SR6602 SR6602-X
Yes Yes
SR6604/SR6608/SR6616
•
Yes on routers with the MCP
MPU
•
No on routers with the RPE-X1 or
RSE-X1 MPU
179
SR6604-X/SR660
8-X/SR6616-X
No