Ip Netstream Export Version - H3C SR6600 Command Reference Manual

NetStream-enabled device and not updated on the NetStream server, the server is unable to associate
the received statistics with its proper fields. To avoid such situation, configure the refresh interval for
version 9 templates so that the NetStream server can refresh them on time.
The refresh frequency and interval can be both configured, and the template is resent when either of the
condition is reached.
Examples
# Configure the device to wait for 60 minutes before sending NetStream version 9 templates again to the
NetStream server.
<Sysname> system-view
[Sysname] ip netstream export v9-template refresh-rate time 60
Related commands
ip netstream export v9-template refresh-rate packet

ip netstream export version

Use ip netstream export version 5 to export NetStream data in version 5 format, and choose whether to
record data about AS information.
Use ip netstream export version 9 to export NetStream data in version 9 format, and choose whether to
record data about AS and BGP next hop information. Statistics about BGP next hop can be exported in
version 9 format only.
Use undo ip netstream export version to restore the default.
Syntax
ip netstream export version 5 [ origin-as | peer-as ]
ip netstream export version 9 [ origin-as | peer-as ] [ bgp-nexthop ]
undo ip netstream export version
Default
NetStream traditional data export uses version 5 format. NetStream aggregation data export uses
version 8 format. MPLS flow data are not exported. The peer AS numbers are exported. The BGP next
hop is not exported.
Views
System view
Default command level
3: Manage level
Parameters
origin-as: Exports statistics of the source AS originating the route for the source address, and the
destination AS for the destination address.
peer-as: Exports statistics of the peer ASs for the source and destination address.
bgp-nexthop: Exports statistics about BGP next hops.
177