Select Lever Inspection
Check select lever for smooth and clear-cut movement
individually. If a malfunction is found, replace select lever
assembly.
"3" Position Switch Inspection
1) Remove console box referring to "Console Box
Components in Section 9H".
2) Disconnect "3" position switch connector (1).
3) Check continuity between "3" position switch
terminals.
"3" position switch specification
Shift select lever to "3" or "2" range: Continuity
Shift other above range: No continuity
S7RW0A5106007
S7RW0A5106008
1
I5RW0C510037-02
Automatic Transmission/Transaxle:
Shift Lock Solenoid Inspection
Check that shift lock solenoid (1) actuate when battery
voltage is conducted.
Shift Lock Solenoid Replacement
1) Remove console box referring to "Console Box
Components in Section 9H".
2) Replace shift lock solenoid (1) using flat head or like.
3) Install covers as they were.
S7RW0A5106009
1
I5RW0C510043-02
S7RW0A5106010
1
I5RW0C510044-01
5A-87
Need help?
Do you have a question about the SX4 and is the answer not in the manual?
Questions and answers