Specifications; Tightening Torque Specifications; Special Tools And Equipment; Recommended Service Material - Suzuki SX4 Service Manual

6C-44 Power Assisted Steering System:

Tightening Torque Specifications

Fastening part
Tie-rod end nut
Tie-rod end lock nut
Wheel nut
Steering gear case mounting bolt
Steering lower shaft assembly upper joint bolt
Steering lower shaft assembly lower joint bolt
Tie-rod
Earth cable bolt
Rack damper screw
Rotation torque of pinion
Steering rack damper lock nut
NOTE
The specified tightening torque is also described in the following.
"Steering Gear Case Assembly Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".

Recommended Service Material

Material
Grease
Water tight sealant
NOTE
Required service material is also described in the following.
"Steering Gear Case Assembly Components"

Special Tool

09944–18220
Pinion torque checking
socket

Specifications

Tighten 25 N⋅m (2.5 kgf-m, 18.0 lb-ft) and
loosen 180° and then tighten 3.9 N⋅m (0.39
kgf-m, 3.0 lb-ft) and turn it back by 10° or
less by the specified procedure.

Special Tools and Equipment

SUZUKI recommended product or Specification
SUZUKI Super Grease E
SUZUKI Bond No.1207F
Tightening torque
N⋅m kgf-m
45 4.5
45 4.5
85 8.5
70 7.0
25 2.5
25 2.5
75 7.5
4.0 0.4
2.2 0.22
60 6.0
P/No.: 99000–25050
P/No.: 99000–31250
SUZUKI scan tool
—
This kit includes following
items. 1. Tech 2, 2. PCMCIA
card, 3. DLC cable, 4. SAE
16/19 adapter, 5. Cigarette
cable, 6. DLC loop back
adapter, 7. Battery power
cable, 8. RS232 cable, 9.
RS232 adapter, 10. RS232
loop back connector, 11.
Storage case, 12.
Note
lb-ft
32.5
32.5 /
61.5
51.0
18.5
18.5
54.5
2.8
1.5
43.5
Note
/
S7RW0A6307001
S7RW0A6308001
S7RW0A6308002