Specifications; Tightening Torque Specifications - Suzuki SX4 Service Manual

Hide thumbs Also See for SX4:
Table of Contents

Advertisement

3A-13 Drive Shaft / Axle: Front
• When installing left oil seal (1) and right oil seal (2)
using special tool, use care so that oil seals in proper
direction and position as shown in the figure.
Special tool
: 09925–15410
Distance
"a": 0 – 1 mm (0 – 0.04 in.)
"b": 8 – 9 mm (0.13 – 0.35 in.)
• Be sure to apply grease to oil seal lip and bearing side
space indicated in the figure.
"A": Grease 99000–25011 (SUZUKI Super Grease
A)
1
"A"
"a"

Tightening Torque Specifications

Fastening part
Brake hose mounting bolt
NOTE
The specified tightening torque is also described in the following.
"Front Drive Shaft Assembly Components Location: Front"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
• Press-fit center shaft (1) from left oil seal (2) side.
2
"A"
"b"
I5RW0A311007-01

Specifications

Tightening torque
N⋅m
25
2
kgf-m
lb-ft
2.5
18.0
1
I5RW0A311008-01
S7RW0A3117001
Note

Advertisement

Table of Contents
loading

Table of Contents

Save PDF