Suzuki SX4 Service Manual page 807

9) Remove fluid cooler pipes (1) and pipe unions (2).
10) Remove fluid level gauge (3) and fluid filler tube (4).
3
4
1
11) Remove oil pan (1) and oil pan gasket (2).
NOTE
• For removal of oil pan, do not turn
transaxle over as this will contaminate
valve body with foreign materials in
bottom of oil pan.
• When removing oil pan, tap around it
lightly with plastic hammer. Do not force it
off by using screwdriver or the like.
12) Remove oil strainer assembly (1).
13) Disconnect connectors (2) from solenoid valves and
transmission fluid temperature sensor (1).
2
I5RW0C510060-01
14) Remove valve body assembly bolts.
CAUTION
!
Be careful not to let manual valve fall off
when removing valve body assembly.
NOTE
There are five kinds of bolts (bolts A (1), B (2),
C (3), D (4) and E (5)) fixing valve body
assembly.
I2RH0B510086-01
15) Remove manual valve rod (1) from manual valve
lever (2), then remove valve body assembly (3).
I2RH0B510087-01
Automatic Transmission/Transaxle:
1
5A-107
2
I5RW0C510038-02
I2RH0B510089-01
I2RH0B510090-01