Download Table of Contents Print this page

Direct Clutch Assembly Inspection - Suzuki SX4 Service Manual

Hide thumbs Also See for SX4:

Advertisement

Table of Contents
5A-124 Automatic Transmission/Transaxle:

Direct Clutch Assembly Inspection

Clutch Discs, Plates and Retaining Plate
Check that sliding surfaces of discs, separator plates
and retaining plate are not worn hard or burnt. If
necessary, replace.
NOTE
• If disc lining is exfoliated, discolored,
replace all discs.
• Before assembling new discs, soak them
in A/T fluid for at least two hours.
Direct Clutch Return Spring Subassembly
S7RW0A5106040
Measure free length of direct clutch return spring
subassembly.
Direct clutch return spring subassembly free length
"a": 36.04 mm (1.419 in.)
NOTE
Do not apply excessive force when
measuring spring free length. Perform
measurement at several points.
Direct Clutch Piston
Shake direct clutch piston lightly and check that check
ball (1) is not stuck.
I2RH0B510172-01
Blow in low pressure air (Max. 100 kPa, 1 kg/cm
to check ball to check that there is no leakage.
I2RH0B510173-01
2
, 15 psi)
I2RH0B510174-01

Advertisement

Table of Contents
loading

Table of Contents