Download Table of Contents Print this page

Suzuki SX4 Service Manual page 827

Hide thumbs Also See for SX4:

Advertisement

Table of Contents
6) Install intermediate shaft subassembly (1) to
transaxle rear cover (2). Apply compressed air (400
– 800 kPa, 4 – 8 kg/cm
of transaxle rear cover to remove forward clutch
piston (4).
7) Apply compressed air (400 – 800 kPa, 4 – 8 kg/cm
57 – 113 psi) to oil hole (1) of transaxle rear cover to
remove forward clutch drum (2).
8) Remove forward clutch piston O-ring (1) from
intermediate shaft subassembly (2).
2
, 57 – 113 psi) to oil hole (3)
I2RH0B510182-01
I2RH0B510183-01
I2RH0B510184-01
Automatic Transmission/Transaxle:
9) Remove forward clutch drum O-ring (1) from forward
clutch drum (2).
10) Remove intermediate shaft seal ring (1) from
intermediate shaft subassembly (2).
2
,
Reassembly
Reverse disassembly procedure for assembly, noting the
following points.
• Before assembling, apply automatic transaxle fluid to
component parts.
• Replace O-rings and seal ring with new ones.
• Do not damage forward clutch return spring
subassembly and balancer (1) by pressing forward
clutch return spring subassembly passing through its
original installing position over 1.5 mm (0.059 in.).
Special tool
(A): 09926–97610
5A-127
I2RH0B510185-01
I2RH0B510186-01
I2RH0B510180-01

Advertisement

Table of Contents
loading

Table of Contents