6C-30 Power Assisted Steering System:
Inspection of P/S Control Module and Its Circuits
The P/S control module and its circuits can be checked at the P/S control module wiring couplers by measuring
voltage and resistance.
P/S control module cannot be checked by itself. It is strictly prohibited to connect voltmeter or
ohmmeter to the P/S control module with connectors disconnected from the P/S control module.
1) Remove console box.
2) Check for voltage at each terminal with connectors connected to the P/S control module.
As each terminal voltage is affected by the battery voltage, confirm if the battery voltage is 11 V or
more when ignition switch is ON.
[A]: P/S control module connector No.1 "E11" (viewed from harness side)
[B]: P/S control module connector No.2 "E13" (viewed from harness side)
[C]: P/S control module connector No.3 "E12" (viewed from harness side)
12 13 14 15 16 17 18 19 20