Reassembly
1) After applying A/T fluid to new O-rings, fit them to
housing plugs. Finally install plugs to torque
converter housing.
Tightening torque
Torque converter housing plug (a): 7.5 N·m (0.75
kgf-m, 5.5 lb-ft)
2) Using special tools, assemble differential side RH
bearing cup.
Special tool
(A): 09924–74510
(B): 09944–88220
3) Using special tool, install countershaft RH bearing
cup.
Special tool
(A): 09924–74510
(B): 09944–88220
(B)
I2RH0B510242-01
(A)
(B)
I3RM0B510063-01
(A)
I3RM0B510064-01
Automatic Transmission/Transaxle:
4) Using special tools, install new differential side oil
seal to torque converter housing.
Special tool
(A): 09913–75510
Differential side oil seal installing depth
"a": 13.2 – 14.2 mm (0.52 – 0.56 in.)
5) Apply grease to oil seal lip.
"A": Grease 99000–25030 (SUZUKI Super
Grease C)
"A"
6) Install lubrication LH tube (1) and RH tube (2).
7) Install fluid reservoir RH plate (1) and lubrication
tube clamp (2).
Tightening torque
Lubrication tube clamp bolt (a): 5.5 N·m (0.55
kgf-m, 4.0 lb-ft)
Fluid reservoir RH plate bolt (b): 5.5 N·m (0.55
kgf-m, 4.0 lb-ft)
5A-141
"a"
(A)
I5RW0C510065-02
I2RH0B510237-01
I2RH0B510246-01