Download Table of Contents Print this page

Suzuki SX4 Service Manual page 1211

Hide thumbs Also See for SX4:

Advertisement

Table of Contents
5) Check that there is no open, short or damage in
special tools (deployment harness (A), adapter cable
(B), (C) and (D)). If any faulty condition is found, do
not use it and be sure to use new special tool. And
connect adapter cable (B), (C) or (D) to deployment
harness (A) and lock connectors with lock slider.
Special tool
(A): 09932–75031
(B): 09932–78332
(C): 09932–77310
(D): 09932–76510
6) Short two deployment harness leads together by
fully seating one banana plug (1) into the other.
WARNING
!
Deployment harness (A) shall remain shorted
and not be connected to 12 volts vehicle
battery until you are ready to deploy air bag
(inflator) module or activate seat belt
pretensioner.
7) Connect adapter cable (B), (C) or (D) in series with
deployment harness (A) to air bag (inflator) module
or seat belt pretensioner as follows.
• For driver air bag (inflator) module [A]
Connect adapter cable (B) in series with
deployment harness (A) and push adapter cable
(B) connector to air bag (inflator) module
connector till click can be heard.
• For passenger air bag (inflator) module [B]
Connect adapter cable (B) in series with
deployment harness (A) and push adapter cable
(B) connector to air bag (inflator) module
connector till click can be heard.
• For side-air bag (inflator) module [C]
Connect adapter cable (B) in series with
deployment harness (A) and push adapter cable
(B) connector to side bag (inflator) module
connector till click can be heard.
• For side curtain-air bag (inflator) module
(hatchback model) [D]
Connect adapter cable (C) in series with
deployment harness (A) and push adapter cable
(C) connector to air bag (inflator) module
connector till click can be heard.
• For side curtain-air bag (inflator) module (sedan
model) [E]
Connect adapter cable (D) in series with
deployment harness (A) to air bag (inflator)
module and lock connect with lock part.
• For seat belt pretensioners [F]
Connect adapter cable (D) in series with
deployment harness (A) to seat belt pretensioner
and lock connector with lock part.
Air Bag System:
[A]
(B)
1
(A)
[B]
(B)
1
(A)
[C]
(B)
(A)
[D]
(C)
1
(A)
[E]
2
1
(D)
[F]
1
2
1
(A)
8B-118
1
1
(A)
(D)
I7RW0A820006-01

Advertisement

Table of Contents
loading

Table of Contents