Suzuki SX4 Service Manual page 781

Reference waveform No. 1
Pressure control solenoid valve signal at engine idling.
Measurement
CH1: "C06-4" to "C06-1"
terminal
Oscilloscope CH1: 5 V/DIV
setting TIME: 2 ms/DIV
• After warmed up to normal
operating temperature
Measurement
condition
• Engine at specified idle speed
with "P" range.
Reference waveform No. 2
TCC pressure control solenoid valve signal at engine
idling.
Measurement
CH1: "C06-5" to "C06-1"
terminal
Oscilloscope CH1: 5 V/DIV
setting Time: 2 ms/DIV
• After warmed up to normal
operating temperature
Measurement
condition
• Engine at specified idle speed
with "P" range
Reference waveform No. 3
CAN communication line (High & Low) signal at engine
idling.
Measurement
terminal
Oscilloscope
setting
Measurement
condition
I3RM0B510029-01
Reference waveform No. 4
Input shaft speed sensor signal at engine idling.
Measurement
terminal
Oscilloscope
setting
Measurement
condition
I4RS0A510024-01
Automatic Transmission/Transaxle:
CH1: "C06-7" to "C06-1"
CH2: "C06-17" to "C06-1"
CH1: 1 V/DIV
TIME: 100 µs/DIV
• After warmed up to normal
operating temperature
• Engine at specified idle speed
with "P" range.
CH1: "C07-6" to "C06-1"
CH1: 2 V/DIV
TIME: 10 ms/DIV
• After warmed up to normal
operating temperature
• Engine at specified idle speed
with "P" range.
5A-81
I3RM0B510030-01
I3RM0B510027-01