Warning Light, Indicator Light Description - Suzuki SX4 Service Manual

4F-6 Electronic Stability Program:

Warning Light, Indicator Light Description

There are five types of warning light and indicator light in instrument cluster, which are controlled by ESP® control
module. They give warning / indication to driver by changing the modes light ON / blinking / light OFF.
The followings are the condition and operation of warning lights and indicator lights.
Warning light / Indicator light
ABS warning light
EBD warning light (brake warning
light)
ESP® warning light
SLIP indicator light
ESP® OFF light
3
4
1. ABS warning light
2. EBD warning light (brake warning light)
3. ESP® warning light
If ABS has abnormality, the light turns "ON".
• If EBD system has abnormality, the light turns "ON".
• If bake fluid level in reservoir is minimum level, the light turns "ON".
• Parking brake switch is ON, the light turns "ON".
If ESP® systems has abnormality, the light turns "ON".
• If stability control system and traction control system is active, the light blinks at
5 Hz.
• If steering angle sensor calibration is incompleted (DTC C1075 is detected)
and/or steering angle sensor message data is missing from CAN
communication (DTC U0126 is detected), the light blinks at 1 Hz.
If ESP® OFF switch is turned "ON", the ESP® OFF light lights up. When it is
"ON", TCS and stability control system functions are controlled not to work.
2
1
5
I7RW01460001-01
4. SLIP indicator light
5. ESP® OFF light
Condition and operation
S7RW0A4601003