Fuel Pump Inspection
• Check fuel pump assembly for damage.
• Check fuel suction filter for evidence of dirt and
contamination.
If present, replace or clean and check for presence of
dirt in fuel tank.
• For electrical circuit, refer to "Fuel Pump and Its
Circuit Check in Section 1A".
• For inspection of fuel level gauge (1), refer to "Fuel
Level Sensor Inspection in Section 9C".
Tightening Torque Specifications
Fastening part
Fuel delivery pipe bolt
Ground wire bolt
Fuel tank bolt
Fuel filler hose clamp
Fuel pump assembly bolt
NOTE
The specified tightening torque is also described in the following.
"Fuel System Components"
"Fuel Hose Disconnecting and Reconnecting"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
S7RW0A1706019
Specifications
Tightening torque
N⋅m
kgf-m
25
11
45
1.5
11
1
lb-ft
2.5
18.0
1.1
8.0
4.5
33.0
0.15
1.0
1.1
8.0
Fuel System:
1G-17
I5JB0A171027-01
S7RW0A1707001
Note