6) Remove A/T oil pan (1) and oil pan gasket (2).
7) Remove oil strainer assembly (3).
8) Remove transmission fluid temperature sensor (1)
from sensor clamp.
9) Disconnect solenoid connectors (2).
1
10) Remove shift solenoid valve-A (No.1) (1), shift
solenoid valve-B (No.2) (2) and timing solenoid valve
(3) by removing bolts.
3
Installation
1) Install shift solenoid valve-A (No.1) (1), shift solenoid
2) Connect solenoid connectors identifying their
Shift solenoid valve-A (No.1) (2)
Shift solenoid valve-B (No.2) (3)
Timing solenoid valve (1)
I2RH0B510054-01
TCC pressure control solenoid
valve (4)
Pressure control solenoid valve
(5)
3) Install transmission fluid sensor (6) and sensor wire
2
I5RW0C510038-02
2
1
I4RS0A510028-01
Automatic Transmission/Transaxle:
valve-B (No.2) (2) and timing solenoid valve (3).
Tightening torque
Shift solenoid bolt (a): 11 N·m (1.1 kgf-m, 8.0 lb-
ft)
(a)
3
installing positions by wire color.
Solenoid coupler
to clamp.
4
6
5A-95
2
1
I4RS0A510029-01
Wire color
White
Black
Yellow
Light green / Brown
Green / Gray
5
3
2
1
I5RW0C510039-02