Magnet Clutch Removal And Installation - Suzuki SX4 Service Manual

Magnet Clutch Removal and Installation

Removal
1) Remove compressor from vehicle referring to
"Compressor Assembly Removal and Installation:
Manual Type".
2) Fix armature plate (1) with special tool and remove
armature plate bolt (2).
Special tool
(A): 09991–06310
3) Remove armature plate (1).
1
4) Remove shims from shaft.
5) Remove circlip (1) using special tool.
Special tool
(B): 09900–06107
(B)
S7RW0A7216023
2
(A)
I4RS0A720039-01
1
I4RS0A720040-01
Air Conditioning System: Manual Type 7B-33
6) Remove magnet clutch pulley (2).
NOTE
• If it is difficult to remove magnet clutch
pulley by hand, use puller (1).
• Do not damage magnet clutch pulley when
using puller.
2
7) Remove thermal switch from compressor referring to
"Thermal Switch Removal and Installation: Manual
Type".
8) Remove circlip (1) by using special tool.
Special tool
(B): 09900–06107
9) Remove magnet clutch coil (2) from compressor (3).
2
3
1
I4RS0A720041-01
(B)
1
I4RS0A720042-01