Transfer; General Description; Transfer Description; Diagnostic Information And Procedures - Suzuki SX4 Service Manual

3C-1 Transfer:

Transfer

Driveline / Axle

Transfer Description

The transfer is mounted on transaxle case by fastening bolt with reduction drive gear in transfer and differential case in
transaxle coupled by involute spline. Driving force from transaxle is transmitted to propeller shaft through reduction
drive gear, reduction driven gear and bevel gear of transfer. As bevel gears, which change the direction of driving
torque axis to the direction of the angle with 90 degrees, hypoid gears are provided. Hypoid gears have an advantage
of preventing gear noise, at the same time, they require accurate adjustment of tooth contact and backlash.
1. Intermediate shaft
2. Left case
3. Reduction drive gear
4. Right case

Transfer Symptom Diagnosis

Condition
Noise

General Description

1
8
5. Reduction driven gear
6. Bevel gear
7. Bevel pinion
8. Spacer

Diagnostic Information and Procedures

Possible cause
Inadequate or insufficient lubricant
Damaged or worn bearing(s)
Damaged or worn gear(s)
Preload of taper roller bearing is
reduced
2 3
5
6
7
9
10
I5RW0A330001-01
9. Transfer output retainer
10. Transfer output flange
Correction / Reference Item
Replenish.
Replace.
Replace.
Adjust.
S7RW0A3301001
4
S7RW0A3304001