Suzuki SX4 Service Manual page 1185

• Contact coil assembly
– Check wire harness and connectors for damage or
tightness.
– Check contact coil case for damage.
– Check contact coil circuit referring to "Contact Coil
Cable and Its Circuit Check".
• Instrument panel member and reinforcement
– Check for any distortion, bending, cracking or other
damage.
– Check instrument panel for cracks or deformities.
• Passenger air bag (inflator) module
– Check for dents, cracks, damage or fitness.
– Check harness and connector for damage or
tightness.
• SDM
– Check for external damage such as deformation,
scratch, crack, peeled paint, etc.
– Check SDM for a cause in itself preventing its
proper installation. (There is a gap between SDM
and SDM plate, or it cannot be fixed securely.)
– Check connector or lead wire of SDM for scorching,
melting or damage.
– Check SDM connector and terminals for tightness.
– Check if SDM sets a DTC and is judged as
malfunctioning according to the diagnostic flow.
I4RS0A820048-01
• Air bag wire harness and connections
– Check for damages, deformities or poor
connections.
Refer to "Inspection of Intermittent and Poor
Connections".
– Check wire harness clamps for tightness.
1
I5RW0A820058-03
1. Main harness
2. Grounding point
3. Floor harness
4. Instrument panel harness
Air Bag System:
7
3
8
4
3
5
5. Side-air bag harness
6. Side curtain-air bag harness
(hatchback model)
7. Side curtain-air bag (inflator)
module (sedan model)
8. Side curtain-air bag (inflator)
module (hatchback model)
8B-92
I5RH01820092-01
6
2
I6RW0B820002-01