Suzuki SX4 Service Manual page 320

Hide thumbs Also See for SX4:
Table of Contents

Advertisement

1D-38 Engine Mechanical:
Camshaft bearing thickness (For engine with
VVT)
: 1.5120 – 1.5180 mm (0.0596 – 0.0597 in.)
Wear of Tappet and Shim
Check tappet and shim for pitting, scratches, or damage.
If any malcondition is found, replace.
Measure cylinder head bore and tappet outside diameter
to determine cylinder head-to-tappet clearance. If
clearance exceeds limit, replace tappet or cylinder head.
Cylinder head to tappet clearance
Standard: 0.025 – 0.066 mm (0.0010 – 0.025 in.)
Limit: 0.15 mm (0.0059 in.)
Tappet outside diameter [A]
Standard: 30.959 – 30.975 mm (1.2189 – 1.2195 in.)
Cylinder head tappet bore [B]
Standard: 31.000 – 31.025 mm (1.2205 – 1.2215 in.)
I2RH0B140084-01
I2RH0B140085-01
I2RH0B140086-01

Advertisement

Table of Contents
loading

Table of Contents

Save PDF