5) Remove cooling fan mounting bolts (1).
6) Remove radiator cooling fan assembly (2).
Installation
Reverse removal procedure for installation noting the
following.
• Refill cooling system referring to Step 7) to 17) of
"Cooling System Flush and Refill".
• After installation, verify there is no coolant leakage at
each connection.
Radiator Cooling Fan Disassembly and
Reassembly
Disassembly
1) Remove fan (1) from cooling fan motor (2).
2) Remove fan motor (2) from cooling fan guide (3).
Reassembly
Reverse disassembly procedures for reassembly.
Radiator On-Vehicle Inspection and Cleaning
Inspection
Check radiator for leakage or damage. Straighten bent
fins, if any.
Cleaning
Clean frontal area of radiator cores.
I5RW0C160014-01
Radiator Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Drain coolant referring to "Cooling System Draining".
3) Remove front bumper referring to "Front Bumper
and Rear Bumper Components in Section 9K".
S7RW0A1606012
4) Remove cooling fan assembly referring to "Radiator
Cooling Fan Assembly Removal and Installation".
5) Remove condenser fan referring to "Condenser
Cooling Fan Removal and Installation: Manual Type
in Section 7B".
6) Remove radiator outlet hose from radiator.
7) Remove radiator from vehicle.
Installation
Reverse removal procedures, noting the following.
Tighten radiator support bracket bolts to specified
torque.
Tightening torque
Radiator support bracket bolt: 33 N·m (3.3 kgf-m,
I5RW0C160005-01
24.0 lb-ft)
• Refill cooling system referring to Step 7) to 17) of
"Cooling System Flush and Refill".
• After installation, verify there is no coolant leakage
each connection.
Engine Cooling System:
S7RW0A1606013
I2RH01160014-01
S7RW0A1606014
1F-9