Select Lever Components; Select Lever Assembly Removal And Installation; Select Lever Knob Installation; Select Lever Inspection - Suzuki 2006 SX4 Service Manual

5A-68 Automatic Transmission/Transaxle:
5) Lower vehicle and fill proper amount of an equivalent
of DEXRON ® -III
6) Check fluid level referring to "A/T Fluid Level Check".
Automatic transaxle fluid
: An equivalent of DEXRON
Automatic transaxle fluid capacity
When draining from drain plug hole: 4.5 liters
(7.92 / 9.60 US/Imp pt.)
When overhauling: 7.3 liters (12.85 / 15.57 US/
Imp pt.)
1 2
1. Fluid level gauge
2. "FULL HOT" mark
3. "LOW HOT" mark

Select Lever Components

4
1. Shift lock solenoid
2. Select lever assembly
® -III
1
3 4 5
I4RH01510249-01
4. "FULL COLD" mark
5. "LOW COLD" mark
S6RW0C5106003
1
3
2
I7RW01510032-01
3. Connector
4. "3" position switch
Select Lever Assembly Removal and
Installation
Remove and install select lever referring to "Select Lever
Components".
When installing select lever noting the following.
• After installing select lever, adjust select cable
referring to "Select Cable Adjustment".

Select Lever Knob Installation

Screw select lever knob onto select lever by specified
numbers of rotation below.
Rotation numbers for select lever knob installation
(a): 11 – 12 rotations
CAUTION
!
When installing select lever knob, do not turn
more than specified numbers of rotation.
Otherwise select lever knob is damaged.

Select Lever Inspection

Check select lever for smooth and clear-cut movement
individually. If a malfunction is found, replace select lever
assembly.
S6RW0C5106004
S6RW0C5106005
1, (a)
I7RW01510033-01
S6RW0C5106006