Camshaft, Tappet And Shim Components - Suzuki SX4 Service Manual

Hide thumbs Also See for SX4:
Table of Contents


1D-32 Engine Mechanical:

Camshaft, Tappet and Shim Components

[A]: For engine with VVT
[B]: For engine without VVT
1. Intake camshaft
2. Intake camshaft sprocket assembly
3. Intake camshaft sprocket bolt
4. Exhaust camshaft
5. Shim
: Shim No. on it faces tappet side.
6. Tappet
7. Camshaft housing
8. Camshaft housing bolt
9. Camshaft bearing
: Install a bearing half with some holes to upper side of intake
camshaft No.1 bearing.
: 60 N⋅m (6.0 kgf-m, 43.5 lb-ft)
: Tighten 11 N⋅m (1.1 kgf-m, 8.0 lb-ft) by the specified procedure
: Apply engine oil to sliding surface of each part.


Table of Contents

Table of Contents