Differential Assembly Components - Suzuki SX4 Service Manual

Reassembly
Reverse disassembly procedure for assembly, noting the
following points.
• Shift solenoid valve-A and -B are identical
• After applying A/T fluid to new O-rings, fit them to
solenoid valves, then install solenoid valves to valve
body.
• Tighten solenoid valve bolts to specified torque
Tightening torque
Solenoid valve bolt (a): 11 N·m (1.1 kgf-m, 8.0 lb-ft)
Solenoid valve bolt specification
Bolt Length "a"
A (1) 49 mm (1.93 in.)
B (2) 20 mm (0.79 in.)
C (3) 60 mm (2.36 in.)

Differential Assembly Components

1. Differential side RH bearing
2. Output shaft speed sensor (VSS) drive gear
3. Differential case subassembly
4. Final gear
Automatic Transmission/Transaxle:
Pieces
5
1
1
5. Side bearing shim
6. Final gear bolt
7. Side bearing cup
8. Differential side LH bearing
1
3
1
2
"a"
: Apply automatic transaxle fluid.
: 78 N⋅m (7.8 kgf-m, 56.5 lb-ft)
: Do not reuse.
5A-137
1
I4RS0A510046-01
S7RW0A5106054
I5RW0C510064-01