5A-110 Automatic Transmission/Transaxle:
29) Remove input shaft rear thrust bearing (1) and thrust
bearing race (2).
If input shaft rear thrust bearing is not found,
it may have been taken out with direct clutch
30) Remove direct clutch hub (1).
31) Remove differential assembly (1) and countershaft
32) Remove governor apply No.2 gasket (1).
33) Remove fluid reservoir LH plate (1).
34) Turn over transaxle and remove rear cover assembly
35) Remove reverse clutch drum thrust bearing (1).
If reverse clutch drum thrust bearing is not
found, it may have been taken out with rear