Front Wheel Speed Sensor Encoder On-Vehicle Inspection; Front Wheel Speed Sensor Encoder Removal And Installation; Rear Wheel Speed Sensor Encoder On-Vehicle Inspection; Rear Wheel Speed Sensor Encoder Removal And Installation - Suzuki SX4 Service Manual

4E-37 ABS:
Front Wheel Speed Sensor Encoder On-Vehicle
Inspection
Before inspecting front wheel speed sensor encoder,
remove front drive shaft referring to "Front Drive Shaft
Assembly Removal and Installation: Front in Section
3A".
• Check sensor encoder (1) for crack, damage or
deformation.
• Turn wheel and check if sensor encoder rotation is
free from eccentricity and looseness.
• Check that no foreign material is attached.
If any faulty is found, clean or replace. Refer to "Front
Wheel Hub, Steering Knuckle and Wheel Bearing
Removal and Installation in Section 2B".
Front Wheel Speed Sensor Encoder Removal
and Installation
CAUTION
!
Front wheel speed sensor encoder is
included in front wheel hub assembly. If front
wheel speed sensor encoder needs to be
replaced, replace it as a front wheel hub
assembly.
For removal and installation of front wheel hub
assembly, referring to "Front Wheel Hub, Steering
Knuckle and Wheel Bearing Removal and Installation in
Section 2B".
Rear Wheel Speed Sensor Encoder On-Vehicle
Inspection
S7RW0A4506010
For 4WD model
Refer to "Rear Wheel Speed Sensor On-Vehicle
Inspection".
For 2WD model
Before inspecting rear wheel speed sensor encoder,
remove rear wheel speed sensor referring to "Rear
Wheel Speed Sensor Removal and Installation (2WD
Model)".
• Check encoder (1) for crack, damage or deformation.
• Turn wheel and check if encoder rotation is free from
eccentricity and looseness.
• Check that no foreign material is attached.
If any faulty is found, clean or replace. Refer to "Rear
Wheel Hub Assembly Removal and Installation in
Section 2C".
Rear Wheel Speed Sensor Encoder Removal
and Installation
CAUTION
!
1
Rear wheel speed sensor encoder is included
in rear wheel hub assembly. If rear wheel
speed sensor encoder needs to be replaced,
I5RW0A450026-01
replace it as a rear wheel hub assembly.
For removal and installation of front wheel hub
S7RW0A4506011
assembly, referring to "Rear Wheel Hub Assembly
Removal and Installation in Section 2C".
S7RW0A4506012
S7RW0A4506013