Download Table of Contents Print this page

Air Intake Control Actuator Inspection - Suzuki SX4 Service Manual

Hide thumbs Also See for SX4:

Advertisement

Table of Contents
7A-10 Heater and Ventilation:
Installation
Reverse removal procedure noting the following
instruction.
• Be sure to insert the linkage rod (1) into the hole (2) of
air intake control actuator.
2

Air Intake Control Actuator Inspection

Check air intake control actuator as follows:
1) Using service wire, connect battery positive terminal
2) Using service wire, connect battery positive terminal
1
3) For auto A/C model, using service wire, connect
If malfunction is found, replace air intake control
I7RW01710017-02
actuator.
to "d" terminal and battery negative terminal to
terminal "a". And, check if air intake selector link
operates smoothly and it stops at "FRE" position (1).
to "d" terminal and battery negative terminal to
terminal "c". And, check if air intake selector link
operates smoothly and it stops at "REC" position (2).
battery positive terminal to "d" terminal and battery
negative terminal to "b" terminal. And, check air
intake selector link operates smoothly and it stops at
MIX position (3).
3
"a" "b" "c"
"d"
4
4. Motor rotation direction
S7RW0A7106013
2
1
"d"
"a"
"b"
"c"
I7RW01710018-05

Advertisement

Table of Contents
loading

Table of Contents