Suzuki SX4 Service Manual page 534

Hide thumbs

Advertisement

Table of Contents
3B-45 Differential:
Tooth Contact Pattern
Normal
I5JB0A321041-05
High Contact
Pinion is positioned too far from the center of drive
bevel gear (1).
• Increase thickness of pinion (2) height adjusting
shim and position pinion closer to gear center.
• Adjust drive bevel gear backlash to specification.
IYSQ01321072-01
Low Contact
Pinion is positioned too close to the center of drive
bevel gear (1).
• Decrease thickness of pinion (2) height adjusting
shim and position pinion farther from gear center.
• Adjust drive bevel gear backlash to specification.
IYSQ01321074-01
If adjustment is impossible, replace differential carrier.
IYSQ01321077-01
• Check seating of bevel gear or differential case. (Check bevel
gear for runout.)
• If adjustment is impossible, replace drive bevel gear and pinion
set or differential carrier.
IYSQ01321078-01
Replace drive bevel gear and pinion set or differential case.
IYSQ01321079-01
Diagnosis and Remedy
IYSQ01321073-01
IYSQ01321076-01

Advertisement

Table of Contents
loading

  Also See for Suzuki SX4

Table of Contents