Download Table of Contents Print this page

Automatic Transaxle Unit Dismounting And Remounting - Suzuki SX4 Service Manual

Hide thumbs Also See for SX4:

Advertisement

Table of Contents
5A-102 Automatic Transmission/Transaxle:
Automatic Transaxle Unit Dismounting and
Remounting
Dismounting
1) Take down transaxle with engine. For its procedure,
refer to "Engine Assembly Removal and Installation
in Section 1D".
2) Remove transaxle housing lower plate (1).
3) Remove drive plate to torque converter bolts (1)
engage flat head rod or the like (2) with drive plate
ring gear.
4) Remove starting motor.
5) Remove bolts and nut fastening engine and
S7RW0A5106031
1
I5RW0C510051-01
1
2
I5RW0C510052-01
transaxle, then detach transaxle from engine.
WARNING
!
Be sure to keep transaxle with torque
converter horizontal or facing up throughout
the work. Should it be tilted with torque
converter down, converter may fall off and
cause personal injury.
NOTE
When detaching transaxle from engine, move
it in parallel with crankshaft and use care so
as not to apply excessive force to drive plate
and torque converter.
I5RW0C510053-01

Advertisement

Table of Contents
loading

Table of Contents