Suzuki SX4 Service Manual page 1133

DTC Troubleshooting
Step
1 Was "Air Bag Diagnostic System Check Flow" performed?
2 Passenger air bag check
1) Remove passenger air bag (inflator) module referring to
"Passenger Air Bag (Inflator) Module Removal and
Installation".
2) Check for proper connection to passenger air bag
(inflator) module at terminals in "G259" connector.
3) If OK, then connect special tools (A), (B) and (C) to
"G259" connector.
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
4) Check SDM for DTC.
With ignition switch turned ON, is DTC B1041 indicated?
Action
(C)
STEERING WHEEL
(B)
(A)
"G259"
I7RW01821025-02
Air Bag System:
Yes
Go to Step 2.
Go to Step 3.
8B-40
No
Go to "Air Bag
Diagnostic System
Check Flow".
Replace passenger air
bag (inflator) module
referring to "Passenger
Air Bag (Inflator) Module
Removal and
Installation".