Suzuki SX4 Service Manual page 1197

4) Remove side curtain-air bag (inflator) module fixing
bolts (1) and clips (2).
[A]
1
1
2
1
[B]
1
2
[A]: Hatchback model
5) Remove side curtain-air bag (inflator) module.
WARNING
!
• When carrying a live air bag (inflator)
module, make sure the bag opening is
pointed away from you.
Never carry air bag (inflator) module by
wires or connector on the side of the
module. In case of an accidental
deployment, the bag will then deploy with
minimal chance of injury.
• As the live curtain air bag (inflator) module
must be kept with its bag facing up while
being stored or left standing. This is
necessary so that a free space is provided
to allow the air bag to expand in the
unlikely event of accidental deployment.
• Observe "Precautions on Handling and
Storage of Air Bag System Components"
for handling and storing it.
Otherwise, personal injury may result.
1 1
2
1
1
2
I6RW0B820022-01
[B]: Sedan model
Installation
WARNING
!
Do not install side curtain-air bag (inflator)
module while twisted or bent. Otherwise, side
curtain-air bag (inflator) module may not
deploy and injury may result.
1) Install side curtain-air bag (inflator) module (1) with
clips (2) and new bolts (3).
2) Tighten side curtain-air bag (inflator) module
attaching bolts (4) to specified torque.
NOTE
Confirm not to move clip (2) after tightening
bolt.
Tightening torque
Side curtain-air bag (inflator) module attaching
bolts (a): 11 N·m (1.1 kgf-m, 8.0 lb-ft)
[A]
3
3
2
4, (a)
[B]
3
2
4, (A)
[A]: Hatchback model
Air Bag System: 8B-104
4, (a)
1
3
3
2
3
1
4, (A)
3
2
I7RW0A820005-01
[B]: Sedan model