Analog Devices ADSP-BF506F Hardware Reference Manual page 327

Adsp-bf50x blackfin processor
Hide thumbs Also See for ADSP-BF506F:
Table of Contents

Advertisement

The
MDMA_ROUND_ROBIN_COUNT
remaining in the MDMA round-robin period. It initializes to
MDMA_ROUND_ROBIN_PERIOD
different MDMA stream is granted, or whenever every MDMA stream is
idle. It then counts down to 0 with each MDMA transfer. When this
count decrements from 1 to 0, the next available MDMA stream is
selected.
The
DAB_TRAFFIC_COUNT
the DAB traffic period. It initializes to
is written, or whenever the DAB bus changes direction or
DMA_TC_PER
becomes idle. It then counts down from
system clock (except for DMA stalls). While this count is nonzero, same
direction DAB accesses are treated preferentially. When this count decre-
ments from 1 to 0, the opposite direction DAB access is treated
preferentially, which may result in a direction change. When this count is
0 and a DAB bus access occurs, the count is reloaded from
DAB_TRAFFIC_PERIOD
The
DEB_TRAFFIC_COUNT
the DEB traffic period. It initializes to
is written or whenever the DEB bus changes direction or
DMA_TC_PER
becomes idle. It then counts down from
system clock (except for DMA stalls). While this count is nonzero, same
direction DEB accesses are treated preferentially. When this count decre-
ments from 1 to 0, the opposite direction DEB access is treated
preferentially, which may result in a direction change. When this count is
0 and a DEB bus access occurs, the count is reloaded from
DEB_TRAFFIC_PERIOD
The
DCB_TRAFFIC_COUNT
the DCB traffic period. It initializes to
is written or whenever the DCB bus changes direction or
DMA_TC_PER
becomes idle. It then counts down from
system clock (except for DMA stalls). While this count is nonzero, same
ADSP-BF50x Blackfin Processor Hardware Reference
field shows the current transfer count
whenever
DMA_TC_PER
field shows the current cycle count remaining in
DAB_TRAFFIC_PERIOD
to begin a new burst.
field shows the current cycle count remaining in
DEB_TRAFFIC_PERIOD
to begin a new burst.
field shows the current cycle count remaining in
Direct Memory Access
is written, whenever a
DAB_TRAFFIC_PERIOD
DEB_TRAFFIC_PERIOD
DCB_TRAFFIC_PERIOD
DCB_TRAFFIC_PERIOD
whenever
to 0 on each
whenever
to 0 on each
whenever
to 0 on each
7-91

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADSP-BF506F and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Adsp-bf504Adsp-bf504f

Table of Contents