Igmp Snooping Configuration Commands; Display Igmp-Snooping Configuration - H3C S3100 Series Command Manual

1

IGMP Snooping Configuration Commands

Only the S3100-EI series support the IGMP Snooping querier feature. The related commands are as
follows:
igmp-snooping querier
igmp-snooping query-interval
igmp-snooping general-query source-ip
IGMP Snooping Configuration Commands

display igmp-snooping configuration

Syntax
display igmp-snooping configuration
View
Any view
Parameters
None
Description
Use the display igmp-snooping configuration command to display IGMP Snooping configuration
information.
If IGMP Snooping is disabled on this switch, this command displays a message showing that IGMP
Snooping is not enabled.
With IGMP Snooping enabled, this command displays the following information:
IGMP Snooping status
aging time of the router port
maximum response time in IGMP queries
aging time of multicast member ports
non-flooding feature status
Related commands:
host-aging-time.
Examples
# Display IGMP Snooping configuration information on the switch.
igmp-snooping, igmp-snooping
1-1
router-aging-time, igmp-snooping