Hims/Mims/Mics; Transceiver Modules; Lightning Protector For A Port - H3C SR6604-X Manual

NOTE:
The fan tray structure for the SR6604-X is similar with the fan tray structure for the SR6608-X.
Figure2-22 Fan tray for the SR6616-X
5
(1) Fan
(4) Fan tray release button
Table2-30 Fan tray specifications
Fan tray
Weight
Noise level
Heat dissipation
Automatic fan speed adjustment
Failsafe
Hot swapping

HIMs/MIMs/MICs

H3C SR6604-X, SR6608-X, and SR6616-X routers support HIMs and MIMs. Both HIMs and MIMs
provide synchronous serial ports, Ethernet ports and E1 ports. For more information, see H3C
SR6600/SR6600-X Routers Interface Module Guide.

Transceiver modules

For more information about transceiver modules supported by the SR6604-X, SR6608-X, and
SR6616-X routers, see H3C SR6600/SR6600-X Routers Interface Module Guide.

Lightning protector for a port

If part of the network cable of a copper Ethernet port must be routed outdoors, connect a lightning
protector to the cable before you plug the cable into the port.
You can install the following port lightning protectors to the router:
1
4
(2) Alarm LED (ALM)
(5) Rotating blade hazard label
SR6604-X
1.4 kg (3.09 lb)
57.1 dBA
1778 BTU/h
Supported
Supported
Supported
3
2
SR6608-X
2.2 kg (4.85 lb)
57.4 dBA
3115 BTU/h
2-25
(3) Fan tray status LED (RUN)
SR6616-X
5.3 kg (11.68 lb)
58.1 dBA
5988 BTU/h