Tftp Upgrade Failure; Ftp Upgrade Failure - H3C SR6600-X Series Manual

TFTP upgrade failure

Symptom
Start the router, and upgrade the software through TFTP. The following problems might occur:
•
The CF card has no enough space.
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...\
Failed to write data into storage device, maybe no enough space on device
•
The file to be downloaded is not found.
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...
File not found.
•
The configuration of the network port is incorrect.
Can't connect to the remote host
Solution
To resolve the problem:
1. Delete some files in the CF card or use a new CF card so that enough space is available for the
system software.
2. Type the correct file name.
3. Configure the network port correctly, and make sure the network port is up and you can
successfully ping the TFTP server from the network port.

FTP upgrade failure

Symptom
Start the router, and upgrade the software through FTP. The following problems might occur:
•
The CF card has no enough space.
227 Entering Passive Mode (192,168,1,10,10,204)
150 "xxx" file ready to send (xxx bytes) in ASCII mode
FTP: Error Writing Local File(Screen).
•
The file to be downloaded is not found.
227 Entering Passive Mode (192,168,1,10,10,203)
550 Error: File xxx does not exist
FTP: Error Writing Local File(Screen).
•
The configuration of the network port is incorrect.
FTP: Unrecognized host or wrong IP address!
Solution
To resolve the problem:
1. Delete some files in the CF card or use a new CF card so that enough space is available for the
system software.
2. Type the correct file name.
3. Configure the network port correctly, and make sure the network port is up and you can
successfully ping the FTP server from the network port.
81