Table 94: Show Ip Bgp L2Vpn Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual

JUNOSe 11.0.x BGP and MPLS Configuration Guide
host1#show ip bgp l2vpn vpls customer1 site-id 2 block-offset 1
BGP route information for prefix 2:1
To display only certain information for all VPLS instances (and all VPWS instances)
in the L2VPN address family, including the status of the route:
host1:pe1#show ip bgp l2vpn all fields best rd peer next-hop loc-pref
extended-communities next-hop-cost
Prefix
> 1:1
>m1:1
> 2:1
>m2:1
> 3:1
Table 94 on page 628 lists the show ip bgp l2vpn command output fields.
Meaning

Table 94: show ip bgp l2vpn Output Fields

628
Monitoring Layer 2 NLRI for VPLS Instances
Received route learned from internal peer 2.2.2.2 (best route)
Leaked route
Route placed in IP forwarding table
Best to advertise to external peers
Address Family Identifier (AFI) is layer2
Subsequent Address Family Identifier (SAFI) is unicast
Route Distinguisher (RD) is 100:11
Original Route Distinguisher (RD) is 100:21
MPLS in-label is none
MPLS in-label block size is 0
MPLS out-label is 46
MPLS out-label block size is 20
Next hop IP address is 2.2.2.2 (metric 3)
Multi-exit discriminator is not present
Local preference is 100
Weight is 0
Origin is IGP
AS path is empty
Extended communities RT:100:1 Layer 2:19:00:0
Rd Peer Next-hop
100:11 0.0.0.0 self
100:22 10.2.2.2 10.2.2.2
100:33 10.3.3.3 10.3.3.3
100:44 10.4.4.4 10.4.4.4
100:55 10.5.5.5 10.5.5.5
Field Name Field Description
Local BGP identifier IP address of the local VE router
local AS Autonomous system number
Local-RIB version Version number of the local routing information base
FIB version Version number of the forwarding information base
Next-hop-cost LocPrf Extended-communities
0 200 RT:100:1 Layer2:vpls:mtu=0
3 100 RT:100:1 Layer2:vpls:mtu=0
3 200 RT:100:1 Layer2:vpls:mtu=0
3 0 RT:100:1 Layer2:vpls:down,:mtu=0
3 100 RT:100:1 Layer2:vpls:mtu=0