Clear Bgp Damping - Juniper JUNOS OS 10.3 - SOFTWARE Manual

clear bgp damping

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear bgp damping clear bgp damping
Copyright © 2010, Juniper Networks, Inc.
clear bgp damping
<logical-system (all | logical-system-name)>
<prefix>
clear bgp damping
<prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Clear Border Gateway Protocol (BGP) route flap damping information.
—Clear all BGP route flap damping information.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Clear route flap damping information for only the specified destination
prefix
prefix.
clear
show policy damping on page 2151
show route damping on page 2187
clear bgp damping on page 2019
When you enter this command, you are provided feedback on the status of your request.
user@host> clear bgp damping
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
2019