Hanging Etwork Ettings; Changing Network Settings In An All-In-One Console; Changing The Network Settings Of A Console In A Multi-System Deployment; Changing The Network Settings Of A Non-Console In A Multi-System Deployment - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - INSTALLATION REV1 Installation Manual

B
Changing Network
Settings in an
All-in-One Console
Step 1
Step 2
Step 3
C
HANGING
This appendix provides information on changing network settings for the Console
and non-Console systems when using Trustix or CentOS-4 operating systems in
your deployment including:

Changing Network Settings in an All-in-One Console

•

Changing the Network Settings of a Console in a Multi-System Deployment

•
Changing the Network Settings of a Non-Console in a Multi-System
•
Deployment
You can change the network settings in your All-In-One system. An All-In-One
system has all STRM components, including the Administration Console, installed
on one system.
To change the settings on the STRM Console:
Note: You must have a local connection to your Console before executing the
script.
Log in to the Console, as root.
Enter the following command:
qchange_netsetup
The Configure STRM window appears.
Using the up/down arrow keys to navigate the fields, change the necessary
parameters:
• Hostname — Specify a fully qualified domain name as the system hostname.
Note: If you change the hostname and you are using Offense Resolution, we
recommend you also update the Resolver Agent name, if a Resolver Agent is
assigned to the host.
IP Address - Specify the IP address of the system.
•
Netmask - Specify the network mask address for the system.
•
Gateway - Specify the default gateway of the system.
•
Primary DNS - Specify the primary DNS server.
•
STRM Installation Guide
N
ETWORK
S
ETTINGS